How to apply ProtectionPro

Step by Step Guide on Applying ProtectionPro Screen Protectors

​

Step 1: Clean the Surface of Your Device Use a lint-free cloth to thoroughly clean the surface of your device. Ensure that it is free of any dust, oil, or dirt.

​

Step 2: Apply the Gel Spray a small amount of gel onto the adhesive side of the ProtectionPro film. This will help to prevent bubbles and make it easier to apply.

​

Step 3: Place the Film on Your Device Holding the film by the corners, carefully align it with the device. Then, gently lay the film down on the surface of the device, with the adhesive side facing down.

​

Step 4: Squeegee Out the Air Bubbles Lightly mist the entire top of the film with more gel and use the squeegee (or credit card) to press the gel out from under the film. Start from the center and work your way out towards the edges. This will help to remove any air bubbles and ensure a smooth, bubble-free surface.

​

Step 5: Repeat Repeat the process on the other side of the device, if necessary.

​

​

Caution:

• If the product comes into contact with your eyes, do not rub them. Flush them thoroughly with water for at least 15 minutes and seek medical attention if necessary.

• If swallowed, do not induce vomiting. Contact a physician or poison control center immediately.

• This product contains isopropanol, so use caution when handling.

 

Congratulations! You've successfully applied a ProtectionPro screen protector to your device. Enjoy the added protection and peace of mind knowing your device's screen is protected from scratches and cracks.